CameraLink IP
High speed, High bandwidth Image Acquisition
Home »
CameraLink IP for high speed, real-time, high bandwidth applications
CameraLink is the best suited interface standard for real time, low latency, high bandwidth applications. CameraLink enables transmission of high-resolution image data at high speeds for both line scan and area scan cameras. The interface has a standardized protocol that includes provisions for data transfer, camera timing, serial communications and real time signalling to the camera.
YantraVision CameraLink IP
Our CameraLink IP implements the hardware specification that standardizes the connection between cameras and frame grabbers.
| Mode | Data Rate |
| Base (24 bits per cycle) | 255 MB/s |
| Medium (48 bits per cycle) | 510 MB/s |
| Full (64 bits per cycle) | 680 MB/s |
Key Features
IP Highlights
- Devices supported – Xilinx 7 Series,
Xilinx Zynq UltraScale+ - AXI – Lite based serial communication
- MMCM Mode and PLL Mode
- Integrated in Vivado – IPI
Deliverable
- Encrypted IP package for IPI use
- Example design
- Simulation TB
Validated on
- YV Embedded Framegrabber
- Xilinx zcu106 evaluation board
- Dalsa Linescan Camera
Send Enquiry
